Optimisation of Performance in Alpine Ski Racing with Fusion Motion Capture

Matthew Andrew Dalhousie Brodie

Massey University

2009

Massey University

Matthew Brodie

email: BrodiePhD@gmail.com

Fusion Motion Capture (FMC), a wearable motion capture system was developed, and applied to the optimisation of athlete performance in alpine ski racing. In what may be a world first, the three-dimensional movements of a skilled athlete (with less than 20 FIS1 points) skiing through a complete training giant slalom racecourse were analysed. FMC consists of multiple light weight sensors attached to the athlete including inertial measurement units (IMUs), pressure sensitive insoles and a global position system (GPS) receiver. The IMUs contain accelerometers, gyroscopes, and magnetometers. Limb orientation and location are obtained by mathematically combining the most reliable data from each sensor using fusion algorithms developed by the author. FMC fuses the signals from the IMUs and GPS without the need for the post filtering, usually applied to motion capture data, and therefore, maintains maximum bandwidth. The FMC results were stable and relatively independent of motion type and duration unlike other inertial systems available in 2005, when the research was initiated. Analysis of data collected from an athlete skiing giant slalom contradict the traditional „going straight turning short? race strategy. The shortest path may not always be the fastest. Instead each gate has a different optimum approach arc. Optimum turn radius increases with both increasing speed and increasing terrain slope. The results also contradict laboratory measurements of ski/snow sliding friction and suggest that snow resistance in giant slalom is of similar importance to wind drag. In addition to gravity, the athlete increased speed using the techniques of „lateral projection? and „pumping?. Race performance was determined from the analysis of the athlete skiing through the entire course. FMC proved, therefore, to be more suitable than traditional optical systems that are practically limited to capturing small sections of a race course. The athlete experienced high and rapidly fluctuating torques about all three axes of the lower joints. This information could be useful in designing training programmes racecourses and equipment to reduce knee injuries. Data driven animations and colour coded force vector diagrams were developed to enhance athlete feedback. Inline skating data was also analysed.

Keywords:

Alpine skiing; Athlete performance; Performance analysis; Motion capture

Visit/Download now

Qualitative

Manawatu-Whanganui

High performance, Sport

Adults

Outdoors

Mountains

Capability, Coaching, Performance

Skiing

1401

July 11, 2013